Smart aquaculture solutions
Smart aquaculture solutions
Smart aquaculture solution-The smart aquaculture system can monitor the dissolved oxygen, temperature and other data in the water in real time through real-time monitoring of various values and remote control equipment.
Once the limit is exceeded, oxygenation pumps, water pumps and other equipment are automatically started. Carry out intelligent management.
Since then, it is no longer judged based on manual experience, but scientific and correct monitoring is used to promote the development of efficient, ecological and safe modern aquaculture.
The smart aquaculture system is mainly to detect the water quality parameters of aquaculture. As long as the water environment is balanced, aquaculture is more than half successful. The main monitoring parameters of aquaculture are:
Environmental monitoring of aquaculture waters
Temperature is one of the important environmental factors that affect aquaculture, including the temperature of the water inlet, the temperature in the pond, and the temperature of the air in the farm.
According to experience, in the suitable water temperature range:
1) The higher the water temperature, the greater the fish intake and the faster growth.
2) The higher the water temperature, the shorter the incubation time. Calculating the proper water temperature plays an important role in the growth of fish.
The Internet of Things monitoring system can monitor the temperature of the aquaculture waters 24 hours a day.
When the temperature is higher or lower than the set range, the system will automatically alarm. And send the scene situation to the user's mobile phone via SMS, and the monitoring interface pops up an alarm message.
The user can automatically turn on the water temperature control device through resetting, and the system will automatically shut down when the water temperature returns to the normal value.
The length and strength of light determines the reproduction cycle and production quality of fish growth.
The lighting system will automatically calculate the length of the lighting time required by the fish in the waters and whether it is necessary to open and close the skylight.
Water quality monitoring in aquaculture waters
PH value monitoring
PH value is too low, the water body is acidic. It can cause disease of fish gills, reduce the utilization of oxygen, and make the fish get sick or the bacteria in the water multiply.
The system is equipped with a PH value test probe. When the PH value of the water body exceeds the normal range, the nozzle valve is automatically opened to change the water.
Dissolved oxygen monitoring
The content of dissolved oxygen is related to fish appetite, feed utilization rate, fish growth and development speed, etc. When the dissolved oxygen content of the water body decreases, the system will automatically turn on the aeration pump to increase oxygen.
Ammonia nitrogen content monitoring
The ammonia nitrogen in fish ponds comes from bait, aquatic animal excrement, fertilizer and animal carcass decomposition, etc. The high ammonia nitrogen content will affect the growth of fish, and if it is too high. It will cause fish poisoning and death. And bring significant losses to production.
The system monitors the ammonia nitrogen content, and when it exceeds the normal value range, it is necessary to clean or change the water in the breeding area.
The water quality monitoring parameter data of Jingxun Changtong Smart Aquaculture and Solutions can be uploaded to the cloud platform.
Real-time monitoring of water environment conditions, video monitoring, remote real-time viewing of water environment conditions, without manual duty, scientific breeding, to achieve the effect of increasing production and income.