IOT the best leak detector
Have you or your friend experienced a broken water pipe, water accumulation in the kitchen or bathroom? Water is the most common cause of property damage, even if you do not live in an area prone to flooding. It can come from a variety of sources: water heater failure, pipe bursts, broken water supply lines under the sink, clogged toilets, or even split hoses connected to the washing machine. Just as smoke detectors must be installed in every bedroom and common area of your home, it is best to install water leak detectors in areas where water damage may begin to occur.
Repairing leaks before major water damage occurs can not only save a lot of money but also reduce personal property losses and unnecessary safety issues. You only need to spend a budget of tens or hundreds of dollars in advance, and you can avoid losses of tens of thousands or even hundreds of thousands of dollars. This is the function of the water leak sensor. There are various types of water leak sensors on the market. Do you have any doubts about how to choose a suitable water immersion sensor? This article will introduce you to some of the water leak sensors with the best feedback from users and their most suitable applications.
What is a water leak detector?
The water leak detector is a sensor that detects whether there is a water leak in the measured range. Once there is a water leak, it will immediately send an alarm to prevent the water leakage accident from causing related losses and harm. Water leak sensors are widely used in data centers, communication rooms, power stations, warehouses, archives, and other places that need to be waterproof.
The water leak sensor detects and prevents water accumulation and flooding caused by broken pipes and equipment failures. The water leak detection system consists of sensors, monitoring host, and monitoring platform. The sensor is placed in areas where leakage often occurs, such as near the faucet and under the water heater.
If the installed water leak detector system detects moisture in a location that should be dry, it will trigger a water sensor alarm and send an alarm message to the user. At the same time, control the relay installed near your water supply main, close the water valve, and cut off the water flow in time to prevent more serious damage caused by water leakage when you are not at home. Finding the problem in time and taking measures is the correct way to guarantee your house and property.
What is the best water sensor?
To choose a safe and reliable water leak sensor, it must have the following functions:
Being able to accurately sense water is the most important indicator of a water leak sensor. Therefore, after you install a water leakage detector, first sprinkle a certain amount of water on the sensor according to the detection requirements to see if the sensor can work normally. Secondly, it is recommended that you choose the working principle of using alternating current to collect stagnant water, which can accurately distinguish whether flooding occurs.
2.With alarm function
The method of notification when a water leak is detected by the water leakage detector is also very important. It is best to choose a three-in-one device with a sound alarm, SMS notification, and platform alarm. In this way, in the event of a water leak, not only can people who support the current environment take timely measures, but also remind people who are not on-site or professionals to prepare in advance. Saving time is saving money.
3.With control function
For users who travel frequently and are not in the current environment, it is best to choose a water leakage detector with a control function. Link the controller with the main valve of the water pipe. Once the sensor detects the water leakage signal, the monitoring host sends a closing signal to the valve controller after receiving the signal, so as to cut off the water source in time. Keep your property safe.
In order to avoid trouble, many users will buy wireless water leak sensors without installation. Compared with the wired water leak sensor, this kind of water sensor has an unstable signal and often has power supply problems. If you use it at home and stay at home for a long time, then the wireless water leak sensor can also meet your needs. If you are away for a long time and often monitor the situation of your home or warehouse through remote control, then for the sake of insurance, it is recommended that you choose a water leak sensor with a more stable signal and power supply.
5.Long using life
Water leakage monitoring is a long-term job, and the installation process is also time-consuming. Therefore, as far as possible, choose a water leak sensor that has a long service life and can be reused. This will not only save you costs but also greatly save your time.
Regular inspection and maintenance of the water leakage sensor is also a significant cost. The water leak sensor produced by Renke has a high degree of protection and is not affected by smoke and dust. The current working status of all equipment can be viewed through the PC platform, maintenance-free, and more convenient to use.
JXCT Water sensor
The water immersion sensor is a fully sealed design to ensure the accuracy and reliability of the product. The product has high sensitivity, fast response time, convenient use, and easy installation. The water immersion sensor is a simple and practical leak detection device, which can be installed independently, or used as a detection probe with other hosts for leak detection. This kind of monitoring system is integrated, through its input relay contact signal, it can realize remote alarm and remote equipment control.